Korg Triton Rack Factory Preload Disks

Description

These are the factory preload disks for the Korg Triton Rack. If you need to reload your factory setting then these are the disks you need.
Loading the Preload Disks
Insert Disk 1 into the disk drive, then press the
DISK
key.
1. Press to highlight
PRELOAD.SNG
:
2. Press the
Page menu button Load
in the upper right corner of the display.
3. Press
Load selected
from the popup menu that appears, and a dialog box will appear in the display.
4.
Check
the boxes
Load PRELOAD.PCG too
and
Load PRELOAD.KSC too
. A radio button will indicate
Clear
, which means that the sample data you load will overwrite any previously loaded sample datafrom
the beginning of the sample memory area. (Note: If you were to select
Append
, the new samples
would load into the unused portion of sample memory - for now, make sure
Clear
is selected).
5. Press
OK
. The factory data will load. When the
PRELOAD.KSC
file loads, the display will indicate
Where is a GOSPE000.KMP file
. At this point, the TRITON is looking for the sample data that the
PRELOAD.KSC script file is pointing to.
6. Eject disk 1 from the drive and insert disk 2, then press once -
anywhere
on the display
. The display will now recognize the new disk, and the
PRELOAD
folder will be
highlighted.
TRITON Training Guide
10
7. Press
Select
at the lower-right of the display. All of the sample data in the PRELOAD folder will load.
The display will then indicate
"Writing into memory"
- the data is loading into the TRITON's flash
memory area.
Any files on this disk are being provided free of charge and are readily available for download on the internet. We are charging only for the disk and labor involved in preparing the disk for your use.