Pinarello Dogma F10 59.5cm carbon frameset Italian BB Di2 QR rim road 170 BOB

Description

Pinarello Dogma F10 59.5cm carbon frameset Italian BB Di2 QR rim road bike 170 BOB RL003
Review of condition and comments
Clean. In storage. Non drive side seat stay was damaged and professionally repaired. Abrasion on chain stay protector from dropped chain. 7 mm x 8 mm chip in finish on drive side chain stay near drop out. Wear on drop outs. Features 170 Black on Black finish, full carbon construction, light weight for frame of its size; Pinarello Onda front fork; dual mechanical / Di2 routing; Pinarello top cap and Pinarello cool. No head set bearings included. Set up for Di2 or eTap: fittings necessary to run mechanical are not included but can be obtained from Pinarello. Suitable for a rider six feet two inches.
Specifications:
Brand: Pinarello
Model: F10
Model year: 2018
Size: 59.9 cm
Color: black silver
Frame material: carbon
Fork material: carbon
Fork model: Onda
Steer tube length: 26 cm cut
Steer tube diameter: 1 1/8 inch to 1 1/2 inch
Steer tube material: carbon
Series: road
Wheel size: 700c
Cable routing: Di2
Brake type: rim
Axle type: Quick release
Frame and Wheel rating: Good condition
Following measurements are by Frame and Wheel
Total weight: 1.8 kg / 3 pounds 14 ounces
Effective top tube: 58.0 cm (c-c)
Center of BB to top of seat tube: 58 cm (c-t)
Center of BB to center rails with seat post at minimum insert: 85.0 cm
Head tube length: 22 cm
Following measurements are by Pinarello
Size: 59.5 cm
Seat tube length (c-c): 59.5 cm
Effective top tube length (c-c): 58.7 cm
Seat tube angle: 72.4 degrees
Head tube angle: 73.4 degrees
Head tube length: 21.5 cm
Front center: 60.5 cm
Chain stay length: 40.8 cm
Bottom bracket drop: 6.7 cm
Reach: 39.4 cm
Stack: 61.2 cm
Offset: 4.3 cm
Fork length: 36.7 cm
Other specifications
Bottom bracket: Italian thread
Integrated seat post diameter: aero
Headset: none
Rear derailleur hanger: replaceable
Front derailleur hanger: braze-on
Front derailleur hanger clamp diameter: na
Rear fork spacing: 130 mm
Front fork spacing: 100 mm